Asus SL1200 - Manual (Page 82)

65
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
Figure 9.7. Inbound ACL Configuration Page
9.3.1 Inbound ACL Rule Configuration Parameters
Table 9.1 describes the configuration parameters available for firewall
inbound ACL rule.
Table 9.1. Inbound ACL Rule Configuration Parameters
Field Description
ID
Add New Click on this option to add a new ‘basic’ Firewall rule.
Rule Number Select a rule from the drop-down list to modify its attributes.
Action
Allow Select this button to configure the rule as an allow rule. This
rule when bound to the Firewall will allow matching packets
to pass through.
Deny Select this button to configure the rule as a deny rule. This
rule when bound to the Firewall will not allow matching
packets to pass through.
Move to
This option allows you to set a priority for this rule. The router's firewall acts on packets
based on the priority of the rules. Set a priority by specifying a number for its position in
the list of rules:
1 (First) This number marks the highest priority.
Other numbers Select other numbers to indicate the priority you wish to
assign to the rule.