GC EUROPE Fujivest Super User Manual

Page 50

Fig. 1 The working model which was chosen for
the demonstration of a fixed three unit posterior
bridge and two upper central PFM crowns.

Fig. 2 The already blocked-out dies are being
separated using GC Multisep.

Fig. 3 The wax copings are being formed with
the help of the dipping technique using a special
non-contracting dipping wax.

Fig. 4 The dipped wax copings on the model.

Fig. 5 An inorganic wax is used to design the
coping for adequate porcelain support.

Fig. 6 The root socket is being separated.