Required tools – GE Industrial Solutions LP11U Series UPS - PDU option User Manual
Page 2
Page 2 of 7
LanPro PDU- PDU-IXXX-XXX
Installation Instructions 5/02/04
2020000502
Copyright 2003 GE Zenith Controls
All Rights Reserved
2501 Pecan Street, Bonham TX 75418
903-640-0555 Fax: 903-640-0535
The GE PDU should not be installed until installation personnel have a thorough understanding of the
configuration of the LanPro system it is being added to.
Refer to the LanPro U Installation/User manual for proper Input/Output configurations of the LanPro
UPS.
The PDU can be purchased with a variety of output receptacles for 125 VAC-250 VAC applications.
See Table 1 below for the input and output options available for the LanPro U PDU accessory.
.
LanPro Type UPS Models
Model Type
208/240V, 10/3 SO Cord, L6-30 Plug
120V, 8/3 SO Cord, 5-50 Plug
208/240V, 8/3 SO Cord, 6-50 Plug
No Cord, Hard-wired
5-20 Duplex,125V, 20A
L5-15R,125V, 15A
L5-20R,125V, 20A
L5-30R,125V, 30A
L6-15R,250V, 15A
L6-20R,250V, 20A
L6-30R,250V, 30A
L14-20R,125V/250V, 20A
L14-30R,125V/250V, 30A
5-50R,125V, 50A
Blank Cover Plate
5kVA LanPro U
X
X
X
X
X
X
X
X
X
X
X
X
X
X
6kVA LanPro U
X
X
X
X
X
X
X
X
X
X
X
X
X
X
8kVA LanPro U
X
X
X
X
X
X
X
X
X
X
X
X
X
10kVA LanPro U
X
X
X
X
X
X
X
X
X
X
X
X
X
INPUT
OUTPUT (ANY 3)
Table 1
The PDU is shipped with connection wires to be used when connecting the UPS terminal blocks to
the receptacles on the PDU.
REQUIRED TOOLS
#2 Phillips Screwdriver
7 mm Nut Driver
11/32" Nut Driver