GE Industrial Solutions LP11U Series UPS - PDU option User Manual
GE Industrial Solutions Equipment
Page 1 of 7
LanPro PDU- PDU-IXXX-XXX
Installation Instructions 5/02/04
2020000502
Copyright 2003 GE Zenith Controls
All Rights Reserved
2501 Pecan Street, Bonham TX 75418
903-640-0555 Fax: 903-640-0535
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
WARNING: The equipment covered by these instructions should be installed and serviced
only by competent personnel utilizing proper safety practices and procedures. These
instructions are written for such personnel and are not intended as a substitute for
adequate training and experience in safe procedures for this type of equipment.
PRODUCT DESCRIPTION
The GE PDU-Ixxx-xxx is an AC power distribution panel intended for use with the GE LanPro U
UPS systems. The PDU is designed to provide current protected receptacles as output connections
for the LanPro 5KVA, 6KVA, 8KVA, and 10KVA systems eliminating the need to install hard-wired
output connections. The PDU can also accommodate 1 of 2 different input power cords that may be
installed on the UPS making a complete 'Plug and Play' system.
APPLICATION GUIDELINES
WARNING: The LanPro U PDU-Ixxx-xxx units should only be installed on the LanPro5-
11U LanPro6-11U, LanPro8-11U, and/or LanPro10-11U systems. The PDU is not
approved for use with any other UPS system.
Document Outline
- WARNING: The equipment covered by these instructions should be installed and serviced only by competent personnel utilizing proper safety practices and procedures. These instructions are written for such personnel and are not intended as a substitute for adequate training and experience in safe procedures for this type of equipment.
- PRODUCT DESCRIPTION
- APPLICATION GUIDELINES
- WARNING: The LanPro U PDU-Ixxx-xxx units should only be installed on the LanPro5-11U LanPro6-11U, LanPro8-11U, and/or LanPro10-11U systems. The PDU is not approved for use with any other UPS system.