GE Industrial Solutions 3A Digital PicoDLynx User Manual
3a digital picodlynx, Non-isolated dc-dc power modules, Data sheet

GE
Data Sheet
April 29, 2013
©2013 General Electric Company. All rights reserved.
3A Digital PicoDLynx
TM
: Non-Isolated DC-DC Power Modules
3Vdc –14.4Vdc input; 0.45Vdc to 5.5Vdc output; 3A Output Current
Features
•
Compliant to RoHS II EU “Directive 2011/65/EU”
•
Compatible in a Pb-free or SnPb reflow environment
•
Compliant to IPC-9592 (September 2008), Category 2,
Class II
•
DOSA based
•
Wide Input voltage range (3Vdc-14.4Vdc)
•
Output voltage programmable from 0.6Vdc to 5.5Vdc via
external resistor. Digitally adjustable down to 0.45Vdc
•
Digital interface through the PMBus
TM #
protocol
•
Tunable Loop
TM
to optimize dynamic output voltage
response
•
Flexible output voltage sequencing EZ-SEQUENCE
•
Power Good signal
•
Fixed switching frequency with capability of external
synchronization
•
Output overcurrent protection (non-latching)
•
Over temperature protection
•
Remote On/Off
•
Ability to sink and source current
•
Cost efficient open frame design
•
Small size: 12.2 mm x 12.2 mm x 6.25 mm
(0.48 in x 0.48 in x 0.246 in)
•
Wide operating temperature range [-40°C to
105°C
(Ruggedized: -D), 85°C(Regular)]
•
UL* 60950-1Recognized, CSA
†
C22.2 No. 60950-1-03
Certified, and VDE
‡
0805:2001-12 (EN60950-1) Licensed
•
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
Industrial equipment
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Description
The 3A Digital PicoDLynx
TM
power modules are non-isolated dc-dc converters that can deliver up to 3A of output current. These
modules operate over a wide range of input voltage (V
IN
= 3Vdc-14.4Vdc) and provide a precisely regulated output voltage from
0.45Vdc to 5.5Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using the PMBus
protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus interface supports a
range of commands to both control and monitor the module. The module also includes the Tunable Loop
TM
feature that allows the
user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to
savings on cost and PWB area.
*
UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
#
The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
TRIM
VOUT
VS+
GND
RTUNE
CTUNE
RTrim
VIN
Co
Cin
Vout+
Vin+
ON/OFF
SEQ
MODULE
PGOOD
SMBALRT#
SIG_GND
ADDR1
RADDR0
CLK
DATA
ADDR0
VS-
RADDR1
GND
SYNC
RoHS Compliant