GE Industrial Solutions D8R4 expanded I_O for AV-300i Drives - Manual (Page 10)

—————— I/O Expansion card —————— 10
SIEI
General data
I/O Scan time _______________________________ 2ms
Internal power supply from the drive ____________ +5V
Digital inputs
Input type _________________________________ Voltage/Optocoupled
Inputs no. __________________________________ 8 (2 groups of 4 inputs)
0V connection _______________________________ different 0V for the groups
Voltage input value ___________________________ 15 up to 30V
Current input value ___________________________ 4.5 up to 9mA
Relay outputs
Type ______________________________________ Dry contacts
Output no. _________________________________ 4
Max contact Voltage / Current value ______________ 250V max , 5A max
- 250VAC, 4 A ohmic load, 1.2A inductive load (cosphi=0.4 up to 0.7)
- 115VAC, 5 A ohmic load, 2.6A inductive load (cosphi=0.4 up to 0.7)
- 24VDC, 400mA
Min contact Voltage / Current value ______________ 20V , 50mA (*)
Relay driving type ___________________________ open emitter optocoupled
Relay power supply (external) __________________ +24V -20% +50% @ 20°C
+ 24V power requirements _____________________ 60mA max
(*) N
OTE
! These outputs are not suitable for switching hi fidelity analog
signals management.
Temperature
Storage temperature: __________________________ -20°... +70°C (-68...+158°F)
Operating temperature: ________________________ 0°... +55°C (32...+131°F)
These temperatures are adequate to those of the drive, to which the card is connected.