GE Industrial Solutions GT Series UPS (UL Listed) 208V system PDU - Manual (Page 7)

202 00021 01 6 User manual rev date 8-16--05
4. Plug the equipment that you wish to power into the output receptacles of the PDU.
5. Install and power-up the UPS as instructed in the UPS User Manual supplied with
the UPS system.
6. The installed UPS/PDU system should be similar to the system shown in Fig. 2.
7. The PDU now supplies both 120VAC and 208VAC outputs from the single 208VAC
output of the UPS.
NOTE: Using the 208V PDU without the tray assembly
To secure a stable placing of the 208V PDU as a free standing unit without the
GT tray assembly, it is advised to set up the PDU with supporting stands (not
included in delivery) as shown:
Install Equipment Plug into
any of the L5-15 or L6-**
Output Receptacles
Supported
Equipment
Utility
Supply
Fig. 2
Install Equipment Plug into
any of the L5-15 or L6-**
Output Receptacles
Supported
Equipment
Utility
Supply
Fig. 2
Supporting stands
(not included)