1 - important safety instructions, 1 save these instructions, 2 general – GE Industrial Solutions GT Series UPS (UL Listed) 208V system PDU User Manual
Page 4: 3 installation, 4 transportation
202 00021 01
3
User manual rev date 8-16--05
1.1 Save these instructions
This manual contains important instructions for the 208V PDU that should be followed
during installation and maintenance of the UPS/PDU system.
Before attempting to install and start up the UPS, carefully read this
manual. Keep this manual next to the PDU for future references.
All servicing must be done by qualified personnel. Do not attempt
to service the PDU unless you have had proper training.
WARNING:
By opening or removing covers you run the risk of
exposure to dangerous voltages !
1.2 General
CAUTION
: RISK OF ELECTRIC SHOCK.
The appliance outlets may be electrically live when installed with a UPS, even when
the UPS is disconnected from the utility supply. Dangerous voltages may be present
during battery operation.
Do not open the unit, there are no user serviceable parts inside.
The appliance outlets shall be installed near the equipment and shall be easily
accessible
1.3 Installation
The unit should be installed by service personnel.
To reduce the risk of electric shock, install the PDU in a temperature and humidity
controlled indoor area free of conductive contaminants.
Ambient temperature must not exceed 40
°C (104°F).
It is important that the unit has adequate ventilation. Maintain air movement around
and through the unit. Do not block the air vents.
Avoid placing the unit in direct sunlight or near heat sources.
Avoid spilling liquids on or dropping any foreign object into the PDU.
Do not plug a laser printer or household appliances such as electric heaters or
vacuum cleaners into the PDU. The PDU output is intended to be used only for
electronic loads such as computers and telecommunications equipment.
The unit should be operated by properly trained personnel.
1.4 Transportation
No liability can be accepted for any transport damage when the equipment is
shipped in non-original packaging.
1 - Important Safety Instructions