GE Industrial Solutions FNW500R Series - Manual

Data Sheet
October 5, 2009
FNW500R Series Power Modules; DC-DC Converters
36-75 Vdc Input; 28Vdc Output; 500W Output
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS07-013 ver1.21
PDF name: fnw500r.ds.pdf
:
Applications
ƒ RF Power Amplifier
ƒ Wireless Networks
ƒ Switching Networks
Options
ƒ Output OCP/OVP auto restart
ƒ Shorter pins
ƒ Unthreaded heatsink holes
Features
ƒ High power density: 90 W/in3
ƒ Industry standard pin-out
ƒ Low output ripple and noise
ƒ Industry standard Full brick
116.8mm x 61.0mm x 12.7mm
(4.6” x 2.4” x 0.5”)
ƒ Remote Sense
ƒ 2:1 input voltage range
ƒ Single tightly regulated output
ƒ Constant switching frequency
ƒ Latch after fault shutdown
ƒ Over temperature protection auto restart
ƒ Loosely regulated auxiliary output
ƒ Power good signal
ƒ Output voltage adjustment trim (+10%/-40%)
ƒ Wide operating case temperature range (-40°C to
100°C)
ƒ CE mark meets 73/23/EEC and 93/68/EEC
directives
§
ƒ UL60950-1/CSA † C22.2 No. 60950-1-03 Certified
(
C
CSA
US
) and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The FNW500R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
500W output power in an industry standard full size brick footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections.