GE Industrial Solutions AKD-5, AKD-6, and AKD-8 - Manual (Page 4)

3 Retrofill Doors Assemblies for AKD-5, AKD-6, and AKD-8 DEH-41563 02/12
Related Publications
Publication Publication Number
Brochure DEA-532
Snapshot DEE-543
Installation Manual AKD8 DEH-41549
Installation Manual AKD6 DEH-41548
Installation Manual AKD5 DEH-41547
Accessory: Door Interlock (Door Interlock Kit) DEH-41529
Accessory Retrofill Doors Assembly DEH-41563
Accessory: Position Switch Plate & Position Switch
Assembly & Wiring (Position Switch Kit) DEH-41530
Accessory: Neutral Rogowski CT Disconnect
(Neutral Assemblies) DEH-41531
Accessory: Programmer Disconnects DEH-41532
Accessory: Finger Clusters (Cluster Assemblies) DEH-41533
Accessory: Secondary Disconnects DEH-41534
FAQ DEQ-171
Application Guide DET-753
Guideform Spec DET-754
Spare/Renewal Parts Guide DET-755
Doors, Retrofit Ordering and Replacement
Danger
• Turn off all power to switchgear. Tagout
and lockout main source, up-stream or
main breaker.
• Failure to comply with these instructions
will result in death or serious injury from
severe burns caused by arc flashing that
has exceedingly high temperatures.
• Always wear personal protection equipment
according to OSHA standards and appropriate
to the severity of potential burns.
• Ensure only qualified personnel install, operate, service, and maintain all electrical equipment.
It takes about 5 to 15 minutes to install the retrofill door(s) in the switchgear, but does not include the 20-minute
timing claimed for the roll-in replacement.