GE Industrial Solutions EHHD036A0F HAMMERHEAD Series - Manual

GE
Datasheet
February 28, 2014 ©2014 General Electric Corporation. All rights reserved. Page 1
EHHD036A0F HAMMERHEAD* Series; DC-DC Converter Power Modules
18-75Vdc Input; 3.3Vdc, 36A, 120W Output
Features
 Compliant to RoHS II EU “Directive 2011/65/EU”
 Compliant to REACH Directive (EC) No 1907/2006
 Flat and high efficiency curve
 Industry standard, DOSA compliant footprint
58.4mm x 22.8mm x 8.9mm
(2.30 in x 0.9 in x 0.35 in)
 Ultra wide input voltage range: 18-75 V
dc
 Tightly regulated output
 Remote sense
 Output Voltage adjust: 90% to 110% of V
O,nom
 Constant switching frequency
 Positive remote On/Off logic
 Output overcurrent and overvoltage protection
 Overtemperature protection
 Wide operating temperature range (-40°C to 85°C)
 Suitable for cold wall cooling using suitable Gap Pad applied
directly to top side of module
 ANSI/UL # 60950-1-2011 and CAN/CSA† C22.2 No. 60950-1-
07, Second Edition + A1:2011 (MOD), dated March 19, 2011;
and DIN EN 60950-1 (VDE‡ 0805 Teil 1):2011-01; EN 60950-
1:2006 + A11:2009 + A1:2010, DIN EN 60950-1/A12 (VDE
0805-1/A12):2011-08; EN 60950-1/A12:2011-02, IEC 60950-
1(ed.2);am1:2009
 CE mark meets 2006/95/EC directive §
 Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3 ¤ PoE
standards
 ISO ** 9001 and ISO 14001 certified manufacturing facilities
Applications
 Distributed Power Architectures
 Wireless Networks
 Enterprise Networks including Power over Ethernet (PoE)
 Industrial Equipment
Options
 Negative Remote On/Off logic (preferred)
 Over current/Over temperature/Over voltage protections
(Auto-restart) (preferred)
 1/8 th Brick Heat plate for 1/8 th heatsinks
 1/4 th Brick heat plate with unthreaded inserts
 Surface Mount version (-S)
Description
The EHHD036A0F [HAMMERHEAD*] Series, eighth-brick, low-height power modules are isolated dc-dc converters which provide a
single, precisely regulated output voltage over an ultra-wide input voltage range of 18-75V
dc
. The EHHD036A0F provides 3.3V
dc
nominal output voltage rated for 36A
dc
output current. The module incorporates GE’s vast heritage for reliability and quality, while
also using the latest in technology, and component and process standardization to achieve highly competitive cost. The open
frame module construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and
space efficient solutions. The module achieves typical full load efficiency greater than 90% at V
IN
=24V
dc
and V
IN
=48V
dc
. Standard
features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature
protection. An optional heat plate allows for external standard, eighth-brick or quarter-brickheat sink attachment to achieve
higher output current in high temperature applications.
* Trademark of General Electric Corporation.
# UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant