GE Industrial Solutions CAR2024FP series - Manual (Page 6)

GE Energy
CAR2024FP series rectifier
Input: 90Vac to 264Vac; Output: 24 Vdc @ 83A; 3.3Vdc or 5 Vdc @ 1A
March 28, 2013 ©2012 General Electric Company. All rights reserved. Page 6
LEDs
Three LEDs are located on the front faceplate. The AC
LED provides visual indication of the INPUT signal
function. When the LED is ON GREEN the power supply
input is within normal design limits.
The second LED DC provides visual indication when the
output is ON. When the LED is GREEN then the DC
output is present.
The third LED FLT provides visual indication when a fault
is present. When the LED is RED then a fault condition
exists and the power supply does not provide output
power.
Alarm Table
Test Condition
LED Indicator Monitoring Signals
AC OK DC OK FAULT FAULT DC OK INPUT OK TEMP OK
1 Normal Operation Green Green OFF High High High High
2 Low or NO INPUT OFF OFF Red Low Low Low High
3 OVP Green OFF Red Low Low High High
4 Over Current Green OFF Red Low Low High High
5 Over Temp Alarm Green Green OFF High High High Low
6 Over Temp Fault Green OFF Red Low Low High Low
7 Remote ON/OFF, OFF Green OFF Red Low Low High High
Note: Test condition #2 had 2 modules plug in. One module is running and the other one is with no AC.
Outline Drawing