Universal Audio Realtime Rack - Manual (Page 67)

Realtime Rack Manual Chapter 4: Realtime Rack Application 67
Power
The Power option deactivates an individual plug-in
within a single insert slot. When deactivated, the plug-
in no longer uses UAD DSP resources. Click the modi-
fier to change the power state.
When Power is latched, deactivated plug-ins are in-
dicated by a red modifier, and active plug-ins have a
green modifier.
Caution: Because this function unloads and loads the plug-in from the DSP, audio
artifacts can occur if the power state is changed while audio is being processed by
the plug-in. To disable individual plug-in processing without audio artifacts, use
the power control within the plug-in interface in Channel View instead (however,
the interface control method does not reduce DSP loads).
Remove
The Remove option permanently deletes the plug-in
from the insert slot. When Remove is latched, click the
modifier to delete the plug-in.
Important: If the plug-in settings are modified and
unsaved in a preset, the modified settings are lost
with this function (Remove cannot be undone).
Caution: Because this function unloads the plug-in from the DSP, audio artifacts
can occur if a plug-in is removed while audio is being processed by the plug-in.
Move
The Move option is used to move an individual plug-in
(and its active settings) from one insert slot to another
insert slot in any channel within the Current Bank.
Move can also be used to move a complete channel
strip (all plug-ins in the channel column) from one
channel to another channel within the Current Bank.
Move Individual Plug-In
When Move is latched, drag any insert modifier to move
the plug-in to another slot. If a plug-in exists in the destination slot, the existing plug-in
is bumped to a different slot within the same channel.
Move Channel Strip within same bank
When Move is latched, drag any column modifier to another channel to move the all
plug-ins in the source column to the destination column.
Caution: If plug-ins exist in the destination channel, all existing plug-ins in the
destination channel are deleted. Move operations cannot be undone.