Universal Audio Apollo Software - Manual (Page 51)

Apollo Software Manual Chapter 3: Console Application 51
Cue Source (Apollo 16)
The cue source buttons determines the source of the cue bus mix. The cue source can
be set to output the associated cue mix or the main monitor mix.
CUE (Apollo 16)
When set to CUE, the cue source is the dedicated cue mix, summed with all DAW out-
puts that are routed to the same cue outputs (if applicable). In this mode, the mix of the
cue bus is determined by the cue send controls in the input channel strips and the aux
return strips.
Console’s faders, mutes, and solos are not reflected in the cue outputs in when CUE is
selected (Console’s cue sends are pre-fader).
MON (Apollo 16)
When set to MON, the cue source is Console’s main monitor mix, summed with all DAW
outputs that are routed to the monitor outs (if applicable). Console’s faders, mutes and
solos are reflected in the cue output in this mode.
MONO (Apollo 16)
This button sums the left and right channels of the stereo cue output into a monophonic
signal. The cue output is stereo when the button is white and mono when the button is
yellow.