OSRAM OPTOTRONIC OT EASY 60 II - Manual (Page 4)

4
IV 2009
OT EASY 60 Safety
Safety
General instructions
The control unit must only be installed and put into operation by a qualified electrician.
The applicable safety regulations and accident prevention regulations must be ob-
served.
Safety instructions
WARNING!
Exposed, live cables.
Danger of electric shock!
•
Only work on the control unit when it is de-energised.
CAUTION!
Destruction of the control unit and other devices through incorrect mounting!
•
Ensure that the external pushbutton is designed for the mains voltage.
•
Do not wire the control and pushbutton lines with an external voltage, especially
not a mains voltage of 230 V.
•
Do not exceed the maximum number of connectable components.
•
Only use the intended infrared receiver types.
Intended use
The OT EASY 60
II control unit may only be operated in the operating modes described
in the „Description“ section. All other applications are considered to be inappropriate
use.
If the OT EASY 60
II control unit is not used as intended, there is no guarantee that it
will operate safely.