OSRAM OPTOTRONIC OT EASY 60 II - Manual (Page 17)

17
OT EASY 60
IV 2009
Appendix
Appendix
Technical data
For LED modules With respect to the output conditions:
1 x LINEARlight Colormix Flex (4m),
7 x LINEARlight Colormix, etc.
Operating voltage 220-240 V
AC
/ 50-60 Hz
Permissible voltage fluctua-
tions
198-264 V
AC
Line current, nominal 0.33 A @ 230 V
Output voltage 24 V
DC
Max. module wattage 60 W, distributed over all outputs
(60 W on only one output is also possible)
Power factor PF > 0.95
Max. losses 8 W @ 230 V
Control signal Digital EASY signal via 4-pin RJ-11 modular con-
nection (4p4c)
Master-slave connection
•
Max. 100 m total line length
•
Max. 50 m to pushbutton coupler
•
Max. 1 master and 15 slaves are connectable
•
Do not route the master-slave connections
together with the power supply or LED lines.
Max. number of connectable
components
•
4 EASY IR sensors
•
1 EASY pushbutton coupler
•
1 EASY USB adapter
Dimming mode PWM (300 Hz)
Dimming range 0-100 %
Operating temperature -20 °C … +50 °C
EASY interface 4-pin modular connection
Secondary side Screw terminals
Max. secondary line length 10 m
Dimensions (L x W x H) 220 x 46.2 x 43.6 mm