Mustang Motorcycle Seats Deluxe DayTripper Solo Seat - Harley-Davidson FLHR - Manual

Mounting Suggestions
Harley-Davidson® Road King,
Road King Classic 1997-2007,
FLHRS (Custom) 2004-2007,
FLHT/FLTR/FLHR Screamin’ Eagle 1997-2005 &
FLHX 2006-2007
Solo Seat
Hardware:
• Solo Seat Mounting Nuts Mustang Part#78032 or H-D equivalent (Not Included)
• 1999-2007: Black Nylon Shoulder Washer x 2 (Included)
• 1997-2008: Black Flat Nylon Washer x 2 (Included)
Baseplate Features:
The solo features a 16 gauge formed steel baseplate with rubber
bumpers to minimize vibration and prevent it from touching the frame.
It is a direct replacement for the stock solo. Two chrome mounting tabs
that align with the fender inserts/studs.
Stock Passenger Seat Removal Steps
1. Remove the rear fender screw.
2. Slide the passenger seat back and up.
Stock Solo Seat Removal Steps
1. Remove solo mounting nuts (1999-up) or solo mounting bolts 5/16" - 18 thread (1997-98)
located at the back of the solo.
2. Slide the solo back and up.
Stock One-Piece Seat Removal Steps
1. Remove the rear fender screw.
2. Remove hand strap that is secured to the motorcycle on each side of the seat where the
front saddle bag mount is located.
3. Slide the stock seat back and up.
NOTE: To mount your new Mustang Solo seat you will need
Seat Mounting Nuts, Mustang Part#78032, which are not
included and must be purchased separately, or stock H-D.
Mustang Part#78032
FIG. 1