Mustang Motorcycle Seats One-Piece DayTripper Seat - Harley-Davidson Dyna Glide - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance
please call us at 800-243-1392, Mond
ay
through Friday 9:00 - 5:30 Eastern or send an e-mail to
[email protected] or visit our website at www.mustangseats.com
.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #'s 75582, 75583, 75649, 75150, 75439, 75143, 75532, 75145, 76387, 76392, 75533, 75134, 75746, 75139, 75530,
75405, 75109, 75536, 75111, 75415, 75531, 75125, 75425
Mounting Suggestions
Harley-Davidson® Dyna Glide &
Dyna Wide Glide 1996- 2005
One-Piece Seat
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Rear Fender Screw
• Chrome Mounting Bracket (Included)
Baseplate Features:
All one-piece formed steel baseplates have two sets of
holes for the supplied chrome bracket to bolt into. The
first set of holes closest to the rear of the seat is for all
Dyna Wide Glide models and the second set of holes is
for all Dyna Glide models. Once in place the slotted
chrome bracket aligns with the threaded hole in the
fender.
Removal of Stock Seat
1. Remove rear fender screw and set aside. The stock rear fender screw will be used to attach your
new Mustang One-Piece Seat.
2. If applicable, remove seat strap.
3. Slide seat back and lift up.
Bracket shown in Dyna Wide Glide Position
Fig. I
Bracket shown in Dyna Wide Glide Position
Mounting of Mustang Seat
1. Secure rear bracket to baseplate of passenger seat with
supplied screws. Use the set of holes closest to the rear of
the seat for all Dyna Wide Glide models and second set of
holes for all Dyna Glide models. (Fig. I)
2. Engage nose bracket under welded frame tab.
3. Align chrome rear tab with threaded mount in fender.
4. Push seat down and secure with stock fender screw to
complete the installation process.
Enjoy the Comfort of your new Mustang Seat!