beautypg.com

Mustang Motorcycle Seats Studded Rear Seat - Harley-Davidson FXR User Manual

Page 2

background image

Mounting of Mustang Solo Seat

1. Remove OEM hinge and latch system and

mount to the Mustang seat. (Fig. I)

2. Latch seat to the frame.

Fig. I

Fig. II

Enjoy the Comfort of your new Mustang Seat!

Mounting of Mustang Passenger Seat

1. Install stock fender bolts and washers into the

fender.

2. Engage front slots in baseplate under washers

onto stock fender bolts.

3. Secure stock fender bolts.

4. Align rear tab with stock fender screw.

5. Secure rear tab with stock fender screw

Optional Mustang Mounting Bolts (sold separately)

1. Install Mustang Seat Bolts (Part #78027-

5/16”-24 thread) into fender locations. (Fig. II)

2. Engage front slots in baseplate into slots on

bolts.

3. Align rear tab with threaded hole in fender.

4. Secure rear tab with stock fender screw

These steps are guidelines to help you install your new Mustang product. If you need further assistance, please
call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.

For care and maintenance of our seats, please go to our website under "Support".

Refers to part numbers: 75321, 75515, 75518, 75083, 75520, 75521, 75737, 75760, 75765, 75523, 75528,
75529

Updated 10/14/10 AA

Mounting Suggestions: Harley-Davidson® FXR 1982-94 & 1999-00 Two-Piece Seat continued
from page 1)