Mustang Motorcycle Seats Cyclone Frame Mounting Plate 2008 ONLY Road King FLHT & FLTR and FLHX Street Glide - Manual (Page 2)

Page 2 of 3
Mounting Suggestions for Harley‐Davidson® FLHT, FLHX, FLTR 2008 ONLY,
Cyclone Solo Seat and Frame Mounting Plate
Engage the frame mounting plate’s front T‐
bracket under the motorcycle’s tongue bracket.
Slide frame mounting plate forward until the
two fender studs align with the holes in the
frame mounting plate. The rear mounting
holes can also be made into an oval shape with
a file if a custom fit is desired.
Use the supplied chrome
¼‐20 acorn nuts and
washers to fasten the
frame mounting plate to
the bike.
Continued from page 1
The T‐bracket can be bent up or
down with pliers for the best fit at
the dash. If there is a gap between
the frame mounting plate and dash
the hook and loop flexible nose ex‐
tension disc (adjustable skirt wire
cover) can be positioned under the
dash to hide the dash mounting
bracket or wires.
Bend T-Bracket if needed
Hook and loop
flexible nose
extension disc.