beautypg.com

Mustang Motorcycle Seats Two-Piece Vintage Seat with Driver Backrest - Harley-Davidson VRSCA & VRSCB, No Studs User Manual

Page 3

background image

Enjoy the Comfort of your new Mustang Seat!

Mounting of Mustang Seat continued

Step 5

Step 6

Step 4

Mustang Solo Seat

4. Install the supplied 6 mm x 35 mm long bolts through the motorcycle's hinge mounts then nylon
washers and locknuts.
5. Tighten with a 10 mm wrench. DO NOT OVER TIGHTEN NUTS.
6. Slowly close seat making sure pin lock aligb=ngs with hole in frame to complete the installation process.

Mounting Suggestions: Harley-Davidson® V-Rod: VRSCA & VRSCB Two-Piece Seat
continued from page 2)

page 3

Updated 10/14/10 AA

These steps are guidelines to help you install your new Mustang product. If you need further assistance, please call us at
800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to [email protected], or visit
our website at www.mustangseats.com.

For care and maintenance of our seats, please go to our website under "Support".

Refers to part numbers: 75885, 79335