SENA Parani10 - Manual (Page 5)

5
AT+BTSCAN, n, to 35
AT+BTSCAN, BD_ADDR, to 36
AT+BTCANCEL 36
+++ 36
ATO 37
ATH 37
AT+BTSEC, Authentication, Encryption 37
AT+BTLAST? 37
AT+BTMODE, n 38
AT+BTNAME=”FriendlyName” 38
AT+BTKEY=”nnnn” 38
AT+BTINFO? 38
AT+BTLPM,n 39
AT+BTSD? 39
AT+BTCSD 39
AT+BTFP,n 39
AT+UARTCONFIG, baudrate, parity, stopbit,handshaking 40
Full AT commands set 40
Appendix B: Power Adaptor Specification................................................................................... 45
Appendix C: Troubleshooting...................................................................................................... 47
C.1 ON/OFF of Hardware Flow Control ........................................................................... 47
C.2 Enabling/Disabling of Response Signals OK, CONNECT & ERROR ....................... 48
C.3 For DCE connection................................................................................................... 49
C.4 Hardware Reset ......................................................................................................... 50
C.5 How to get Bluetooth CF cards connected to Parani10............................................. 51