SENA Parani10 User Manual

Page 20

3-7.Select Device Setting icon in the list control box, and select MODE2 in Operation Mode and

apply.

3-8. Now, detach

P01

from your computer.

3-9. Make sure that power to Both

P01

and

P02

are supplied.

With both,

P01

and

P02

, turn off both units using the Switch located on the side of its body.

Then, turn on both

P01

and

P02

almost at the same time.

Now, you will see Green Status LEDs on both units.

P01

and

P02

will be connected automatically, as long as the configuration for both units remains

unchanged.