Atz Page 34: Atd bd_addr
Page 34: Atd bd_addr

34
Description :
In standard mode, you can check whether your PARANI10 is connected to a
host correctly by using this AT command.
ATZ
Function :
Do soft-reset
Response :
Description :
You can do soft-reset by using this AT command. When your PARANI10 is
already connected to the other device, it disconnects the connected device.
You can halt the current ongoing operation by using this command.
AT&F
Function :
Restore the default configuration of your PARANI10.
Response :
Description :
You can restore the default configuration of your PARANI10 by executing this
AT command.
AT+BTINQ?
Function :
Search (INQUIRY) other Bluetooth devices nearby.
Response :
…
Description :
This command is used to inquiry other Bluetooth devices nearby. The
INQUIRY process is carried out during the predefined time duration (30
seconds). The maximum number of INQUIRY result is 10.
ATD BD_ADDR
Function :
Make connection with the given BD_ADDR.
Response :
or