SENA Parani10 - Manual (Page 26)

26
following table shows the operational status and executable AT command sets.
AT Command Standby Pending Online
AT
√ √
ATZ √ √
AT+BTINQ? √ 1)
ATD112233445566 √ 1)
ATD √ 1)
AT+BTSCAN,n √ 1)
AT+BTSCAN,112233445566 √ 1)
AT+BTCANCEL √
+++ √
ATO √ 2)
ATH √ 2)
AT+BTAUTH,Auth,Encr √ 3)
AT+BTMODE,n √ 3) 4)
AT+BTNAME=”Name” √ 3)
AT+BTKEY=”nnnn” √ 3)
ATS10=0 or ATS10=1
AT+BTINFO? √ √
AT+UARTCONFIG,b,p,s √ 3) 4)
1) Effective when Parani10 is not in connection with Bluetooth.
2) Effective when Parani10 is in connection status with Bluetooth.
3) Recommend to be used when Parani10 is not in connections status with
Bluetooth
4) To apply new values to Parani10, software reset requires by ATZ
command or restart Parani10.
3.3 Using Parani10Wizard
The Parani10Wizard is simple configuration utility for point to point communication. User can
easily configure two Parani10s on a local PC.
Before starting configuration, you will need to prepare two Parani10s.
Also, remember that two Parani10s must be powered on during configuration.