Ocean Optics LIBS2500plus - Manual (Page 26)

2: Installing the LIBS System
16 166-00000-000-02-0110
b. Click on the Ocean Optics Devices node. If this node is absent, expand the USB Devices
node. Up to seven HR2000+ Spectrometer entries should be visible (depending on how
many channels are in your LIBS system). This indicates that the LIBS2500plus spectrometers
have been properly installed.
Note
If there are any yellow or red symbols next to each spectrometer entry, then you must
reinstall OOILIBSplus, reboot the system, and then reconnect the spectrometer.
3. In the OOILIBSplus program, select Tools | Select Spectrometer Modules. The HR2000+
Configuration screen appears. There are 8 possible spectrometer assignments. However, only the
number of spectrometer channels that you have in your LIBS system are active.