Ocean Optics LIBS2500plus - Manual (Page 25)

2: Installing the LIBS System
166-00000-000-02-0110 15
Other Software Installation
Imaging Module Camera Driver
If you are using the imaging module, install the driver for the imaging module camera.
Crossfire Camera Driver
If you are using the Crossfire system, you must install its camera driver and software.
► Procedure
1. Install the Crossfire camera driver (CameraDriver). Windows warns you that this is a
nonapproved device. Choose “Continue Anyway.”
2. Install Microsoft .NET framework (dotnetfx).
3. Install Crossfire’s oView software (oViewSetup). Do not run oView software at this time.
System Start-up
When you first use the HR2000+ Spectrometer(s) for the LIBS2500plus on this computer, you must
assign each spectrometer to specific channels and load the element library.
Assigning Spectrometers
► Procedure
1. Start the OOILIBSplus program. You may receive an error message the first time you start the
software. This is normal. Continue to Step 2.
2. Confirm that the spectrometers have installed properly. To do this,
a. Navigate to Control Panel | System (or right-click on My Computer and select Properties):
For Windows 2000/XP: Click the Hardware tab, then click the Device Manager button.
For Other Windows Versions: Click the Device Manager tab. The System Properties
screen appears.