Factory Direct Hardware Von Duprin 9957EO26D3 - Manual (Page 52)

Cylinders
Cylinders are not furnished with device or trim and must be specified when ordering. Refer to trim pages for cylinder type.
Mortise — 3215 (Schlage B502-191 cam) Rim 3216
50 © 2004 Ingersoll-Rand. May be copied for use with specification submittal.
98/99™ Accessories and Door Handing
Dogged (Inverted) Cam Undogged Cam
(Standard Operations)
For Cylinder Dogging For Standard Trim Functions
Door Handing
Dummy Pushpad
The 330 dummy pushpad is designed as a companion unit for all 99 devices. The 350 dummy pushpad is a companion unit for all 98 devices. The
pushpad is rigid or nonfunctioning. A push/pull operation can be accomplished by using 990DT, 996DT trim or any Ives Pull.
The 330/350 can be equipped with a functional pushpad and will accommodate an RX switch. Specify RX-330. May also be equipped with the RX2,
double RX switch. Specify RX2-330
To order, specify:
1. 330 or 350.
2. Size 3' or 4' (914mm or 1219mm)
3. Finish, US3, US4, US10, US26, US26D, US28, 313AN, 315AN, 350 Only US32D.