Factory Direct Hardware Von Duprin 9957EO26D3 - Manual (Page 38)

36 © 2004 Ingersoll-Rand. May be copied for use with specification submittal.
98/99™ CM993 and PRO993 Exit Trim
The Von Duprin Computer Managed CM993 Exit Trim is a stand-alone,
battery-powered exit trim for use on doors where an exit device is
required for egress. The CM993 is designed to be used with Von
Duprin 98/99™ Rim and Vertical Rod exit devices for unmatched
access control and ease of use. It can be programmed with
LockLink
™ or LockLink ™ Express access control management
software. The same software can also manage the Schlage CM
Locks and the Locknetics Universal Controllers, which provide
intelligent access control for electrified or battery-powered products
such as magnets, strikes and cabinet locks.
Multiple users, Multiple access points. Multiple credential. One way
to manage them.
Provides Unmatched Access Control
• Manages up to 1,000 users and provides audit trail for last 1,000
events
• SmarTime feature allows for time functionality:
– 16 time zones
– 16 time schedules
– 32 holidays
– first person in
– time expiration
– time activation
• Full-swipe mag stripe card reader for maximum readability and
reliability
• Optional audit trail of mechanical key override
• Optional auto card updating feature disables a lost or stolen card when
the reissued card is presented at the lock
• LED status indicators
Easy To Retrofit...Easy To Operate And
Architecturally Designed For New Construction
• Directly retrofits existing trim
• Fits doors from 1 ³ ₈" to 2¹ ₄" thick
• Comes with Schlage Everest 1 ¹ ₄" cylinder,
but can adapt to other existing key systems
• LockLink software that programs the locks is
Windows ® -based and menu-driven. It can be
operated with minimal training.
For use with Von Duprin 98/99™ Series Exit Devices including
Rim, Surface Vertical, Concealed Vertical and Three-Point latch-
ing models. (Not for use with mortise devices).
NOT FOR USE WITH CHEXIT DEVICES
Conversion to New Card
System Not Necessary
• Our exit device trims most
likely work with your existing
mag card and HID prox cards
Von Duprin Programmable
PRO993 Exit Trim For
Manual Programming
• Manually program up to 120
keycodes right at the trim
• Similar mechanical features
as CM993
• Complements Schlage PRO
and Locknetics PRO series
products