Factory Direct Hardware Von Duprin 9957EO26D3 User Manual
Page 26

9848/9948 Concealed Vertical Rod Device
24
© 2004 Ingersoll-Rand. May be copied for use with specification submittal.
9848/9948 Concealed vertical rod device for use on single or double metal doors, UL listed for Panic Exit
Hardware. Covers stock hollow metal doors with 86 or 161 cutouts. Devices are ANSI A156.3 – 2001 Grade 1.
The 9848 device has a smooth mechanism case and the 9948 device has a grooved case. The concealed
vertical rod device is non-handed except when the following device options are used: SD (Special Dogging), or
SS (Signal Switch). See Opposite page for available outside trim and functions.
The 9848/9948 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28, 313AN,
315AN and US32D for the 9848 device only. See page 52 for component finishes and the inside cover for
finish chips.
See page 53 for How to Order specification
Top Latch
Bottom Latch
385A
Bottom Strike
338
Top Strike
Specifications
Device Functions
Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive
screw from device
Device Lengths
3’
2’4" to 3’ (711mm to 914 mm) Door Size
4’
2’10" to 4’ (864 mm to 1219 mm) Door Size
Strikes
Top - 338 – Unfinished, Bottom – 385A - Unfinished
Optional Strikes – see page 39
Dogging Feature
Hex key dogging standard
Dogging Options
CD
Cylinder Dogging
see page 48
SD
Special Center Case Dogging
see page 48
LD
Less Dogging
see page 48
Electric Options
LX
Latchbolt Monitor Switch
see page 42
RX
Pushpad Monitor Switch
see page 42
RX2 Double Pushpad Monitor Switch
see page 42
EL
Electric Latch Retraction
see page 43
SS
Signal Switch
see page 43
CX
Chexit Delayed Exit
see page 45
ALK Alarm Exit Kit
see page 42
Miscellaneous Options
PN
Pneumatic Latch Retraction
see page 48
GBK Glass Bead Kit
see page 49
Fasteners &
Includes 1
³ ₄" (19mm) – 2 ¹ ₄" (57mm) Wood & Metal Doors
Sex Bolts (SNB)
Optional SNB available for device, see next page for quantities
Latch Bolt
Deadlocking Top Bolt,
³ ₄" (19mm) throw
Deadlocking Bottom Bolt, 1
¹ ₂" (38mm) throw
Device Centerline from
39 5/8" (1006 mm) Standard, Adjustable from 35
⁵ ₈" (905mm) to
Finished Floor
49 5/8" (1260mm)
Door Undercut
¹ ₄" (7mm) maximum
Center Case Dimensions
8" x 2
³ ₄" x 2 ³ ₈" (203mm x 70mm x 60mm)
Mechanism Case Dimensions
2
¹ ₄" x 2 ¹ ₄" (57mm x 57mm)
Top & Bottom Latch Case
4
¹ ₂" x 2 1/8" x 1 ¹ ₂" (114mm x 54mm x 38mm)
Vertical Rods
Round 2 piece adjustable rods
Top rod adjustable from 6’8" (2027mm) to 8’4"(2533mm)
Bottom rod adjustable 35
⁵ ₈" (905 mm) to 49 ⁵ ₈" (1260 mm)
Extension rod kits available for doors over 8’4" (2533mm)
Projection
Pushbar Neutral – 3
¹³ ₁₆" (97 mm)
Pushbar Depressed – 3
¹ ₁₆" (78 mm)