Factory Direct Hardware Von Duprin 9957EO26D3 - Manual (Page 39)

37
How To Order CM993 and PRO993 Exit Trim
1. Select Model
2. Select Access Credential Option (CMs only)
3. Select Lever
4. Select Handing
RH Right Hand
LH Left Hand
Note: Handing is field-reversible
5. Select Key Cylinder Option
KD Schlage Everest Cylinder
LC Less Cylinder
Note: Master keyed cylinders order separately
6. Select Finish:
605 Bright Brass 625 Bright Chrome
612 Satin Bronze 626 Satin Chrome (Standard)
613 Oil-Rubbed Bronze 695 Duranodic Dark Bronze
7. Select Trim Options
ATK Audit trail of mechanical key override, includes ATR (Requires
computer programming).
T3 ABA Track 3 Mag Card Reader (ABA Track 2 is standard for MGI
and MGK Series only).
EXT is now standard. Specify if for interior use.
Mag Card Reader for exterior use (for MGI and MGK Series only).
CM993 – MGK – 06 – LH – KD – 695 – EXT
Select Model
Select Access Credential Option
Select Lever
Select Handing
Select Key Cylinder Option
Select Finish
Select Trim Options
IBA iButton (adhesive backed)
IBF iButton on Fob
MAG1 Magnetic Stripe Card – Blank
MAG2 Magnetic Stripe Card – Pre-encoded
PRX1 Prox Card – Standard .070" thick
PRX2 Prox Card – Adhesive backed for photo
application, .070" thick
PRX3 Prox Card – ISO – credit card size and
thickness, .031" thick
PRX4 Prox Card – Dual Technologies, magnetic
stripe and Prox, .031" thick
PF1 Prox Fob
Select Credentials
PRO993 Manually
programmed
exit trim
CM993 Computer
managed exit trim
KPI
Keypad iButton
Reader IBO
iButton Reader MGK
Mag Card
Reader Keypad
iButton Reader
MGI
Mag Card
Reader
iButton Reader PXK
HID prox Reader
Keypad iButton
Reader PXI
HID prox Reader
iButton Reader
#03 #06
Standard
#17
Door Thickness State door thickness. Available from 1 ³ ₈" to 2³ ₄" in
¹ ₈" increments