Vonnic C909IP H.264 Wireless 802.11b_g_n IP Network Camera - Manual (Page 29)

H Series IP Camera User Manual – with Pan/Tilt of CMOS
29
In the Windows OS, if you don’t install the QuickTime, it will remind the users of
installation. Users could install the QuickTime according to its message. After installation,
users can start the QuickTime program, and to access the QuickTime Preferences
dialog box from Edit Menu. Click Advanced, select “custom..” in the Transport Setup. It
pops up the Streaming Transport dia
log box. Please select “HTTP” for transport protocol
and “80” as port ID, and then click “ok”. Please be back to Transport Setup to change
“Custom..” to “Auto”. Finally, click “ok” at the bottom. Please refer to the above Figure 38.
Then you could view the video through Firefox or Safari now.
2) The settings to use Safari in MAC OS
When use MAC, because QuickTime is the default software, user only need go to
Utilities folder under the Applications folder, and start command line program (Terminal
program), input the command as:
qtdefaults write TransportSettings HTTP 80
Then open safari to view.
8.3 Centralization Control Software
IPCMonitor is a free software offered by factory, several devices on LAN and WAN can
be browsed at the same time. The software also support snap, video record and so on.
The below Figure 39 is the interface.
Figure 39
For more information, pls. refer the <> in CD.