Vonnic C909IP H.264 Wireless 802.11b_g_n IP Network Camera - Manual (Page 25)

H Series IP Camera User Manual – with Pan/Tilt of CMOS
25
Figure 32
7.5.2 Default Setting
Figure 33
 Reboot button to restart the equipment, if you have set the pre-position, and it will turn
this position.
 Click “Factory Default” button, equipment will restart and back to all the default settings.
 Click “save”, it will save all the present settings.
 “Restore” part, select the setting file you have saved, click OK, it will recover all the
settings.
 “Upgrade” part, select the firmware file for upgrading, click OK, and you are able to
upgrade the equipment. After the upgrading, equipment will restart. Upgrading took a
little long, please wait patiently. If upgrading is finished, it will show you a message to
remind you.