Ftp setting, Alarm server setting, Ystem – Vonnic C909IP H.264 Wireless 802.11b_g_n IP Network Camera User Manual

Page 24: Etting, Date and time setting, 5 system setting page

H Series IP Camera User Manual – with Pan/Tilt of CMOS

7.4.4 FTP Setting

Figure 30

In order to use FTP function, user should apply username and password on the

FTP server first. And please apply some storage, and the authority to write and

create sub-category into it.

7.4.5 Alarm Server Setting

Figure 31

Please confirm if you have connected to alarm server. The alarm message format as follow:

GET /api/alarm.asp？

username=username&

userpwd=password&

rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port, 3 =Other Type)&

io=0

Alarm server need develop by customer; user can extend other functions on this server, like

SMS, MMS alarm, and mobile phone etc.

7.5 System Setting Page

7.5.1 Date and Time Setting

Please refer to above Figure 32. Select the time zone first. There are three options to set the

time and date. One is manually, another is keeping the same as the time and date on the

computer, and the third one is getting it from the NTP server.