Powersolve TEP75WI Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
High Density DC-DC Modules
TEP 75WI Series, 75 Watt
Features
• High power density
• Ultra wide 4:1 input voltage range
• Very high efficiency up to 90%
• Soft start, Reverse Input Protection
• Adjustable Output Voltage
• Shielded metal case with aluminium baseplate
• Optional adapter for screw terminal connections
• EN50155 Approval for Railway Applications (43-160VDC)
Electrical Specification
Output Voltage Adjustment +10% / -20% by external resistor
Conducted EMI EN 55022 class A, FCC level A (with filter)
Over Current Protection 110-140% of Iout max.
Over Voltage Protection 115-130% of Vout nom.
Short Circuit Protection Continuous, automatic recovery
Reverse input protection Parallel diode
Operating Temperature Range -40°C to +85°C with heatsink (derating applies)
Temperature Coefficient ±0.02%/K
Thermal protection shutdown at 115°C
I/O Isolation test voltage 2250VDC (basic insulation)
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Casing shielded metal case with aluminium baseplate
Remote On/Off shutdown input for low input current (3mA) in standby operation
Output Voltage and Current Ratings
MODEL INPUT OUTPUT OUTPUT RIPPLE & LINE REG. LOAD REG. EFF.
VOLTAGE VOLTAGE CURRENT NOISE
TEP75-2411WI 5.0VDC 15A 75mV pk-pk max. 0.2% 0.3% 88%
TEP75-2412WI 12VDC 6.3A 100mV pk-pk max. 0.2% 0.3% 88%
TEP75-2413WI 9 - 36V 15VDC 5.0A 100mV pk-pk max. 0.2% 0.3% 88%
TEP75-2415WI 24VDC 3.2A 200mV pk-pk max. 0.2% 0.3% 87%
TEP75-2416WI 28VDC 2.7A 200mV pk-pk max. 0.2% 0.3% 87%
TEP75-2418WI 48VDC 1.6A 300mV pk-pk max. 0.2% 0.3% 87%
TEP75-4811WI 5.0VDC 15A 75mV pk-pk max. 0.2% 0.3% 90%
TEP75-4812WI 12VDC 6.3A 100mV pk-pk max. 0.2% 0.3% 89%
TEP75-4813WI 18 - 75V 15VDC 5.0A 100mV pk-pk max. 0.2% 0.3% 89%
TEP75-4815WI 24VDC 3.2A 200mV pk-pk max. 0.2% 0.3% 87%
TEP75-4816WI 28VDC 2.7A 200mV pk-pk max. 0.2% 0.3% 87%
TEP75-4818WI 48VDC 1.6A 300mV pk-pk max. 0.2% 0.3% 87%
TEP75-7211WI 5.0VDC 15A <1% of Vout 0.2% 0.3% 88%
TEP75-7212WI 12VDC 6.3A <1% of Vout 0.2% 0.3% 88%
TEP75-7213WI 43-160V 15VDC 5.0A <1% of Vout 0.2% 0.3% 88%
TEP75-7215WI 24VDC 3.2A <1% of Vout 0.2% 0.3% 88%
TEP75-7216WI 28VDC 2.7A <1% of Vout 0.2% 0.3% 88%
TEP75-7218WI 48VDC 1.6A <1% of Vout 0.2% 0.3% 88%
Options
Heatsink: order code TSP-HS1 (separate order)
Chassis mount adapter: add suffix -CM*
Chassis mount adapter with EMI filter: add suffix -CMF*
DIN-rail mounting clip for chassis mount versions: TEP-MK1
*shipped assembled with converter module
(models pictured with chassis mount adapter and optional heatsink)