Powersolve 10 Port USB Charger - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
10 Port 60 Watt USB Charger
Model: PLV60-USB
Switchable USB Charger
Features
• Universal 90-264VAC Input
• IEC320 C8 2 pin AC Input Connector
(UK power cord included)
• Outputs switchable from 10 x 5V 1A or 5 x 5V 2.4A
• Will charge most devices powered by standard
USB 5VDC chargers
• EMC to EN55022’B’, CISPR22 ‘B’ & FCC ‘B’
• Full International Safety Approvals & CE marked
• Compact Desk Top Enclosure
• Meets ROHS requirements
Electrical Specification
INPUT
Input Voltage & Frequency 90-264VAC 1.3A max, 47-63Hz
Leakage Current 0.75mA max
No Load Power Consumption ≤0.3 Watts
OUTPUT
Output Voltage User selectable 10 x 5VDC 1A ports or 5 x 5VDC 2.4A ports (other 5 disabled)
Charging Current 1A or 2.4A
LED Indicator Shows whether 1A or 2.4A ports selected
Protection Intelligent multiple safety protection function for over current, over voltage, short
circuit and over temperature.
Turn On Delay 5 seconds max 100 to 240VAC input and full load output
Hold Up Time 6mS min full load and 115VAC input or 10mS min full load and 240VAC input
Maximum Overshoot/Undershoot 10% max when power on or off
ENVIRONMENTAL
Operating Temperature 0 to 40ºC, ambient
Storage Temperature -20ºC to +70ºC
Relative Humidity 10-90% non condensing
SAFETY & EMC
Safety Approvals EN60950-1, CCC, ETL Listed(UL & CSA), PSE, KC, CB & CE marked. Class II
EMI/EMC CISPR22 ’B’, FCC Part 15 ’B’, EN55022 ‘B’
MECHANICAL Plastic enclosure, dimensions 153 x 106.8 x 29.4mm, weight 310 grams
The PLV60-USB is a brand new 60 Watt AC-DC USB charger with switch selectable
option of either ten 5V 1A outputs or five 5V 2.4A outputs. This product is ideal to charge a
variety of products, including mobile phones, tablet PC’s, cameras or any other electronic
device that can be charged from a standard USB output. It is housed in a smart robust, desk-
top mounting, plastic enclosure and comes complete with UK mains lead. There are LED
indicators to show whether 10 x 1A ports or 5 x 2.4A ports have been selected via the front
panel slider switch. The charger conforms to the normal EMC and EMI standards and as
well as CE marking, carries full international safety certification. So you can be sure you are
in safe hands with the PLV60-USB