Powersolve Function Modules for TSP Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
Industrial Power Supplies
TSP Series, Function Modules
Specifications Redundancy Module
MODEL Input max. Power Output V Output P
per input Adjust max.
TSP-REM360 2 x 24VDC 360W 24VDC 360W
TSP-REM600 2 x Control 600W (24-27VDC) 600W
Battery Controller Module
MODEL Input max. Power Output V Output P
per input nom. max.
TSP-BCM24 24VDC and 360W 24VDC 360W
TSP-BCM24A 24V Battery 600W 24VDC 600W
Battery Pack
MODEL Nominal Charge Current Capacity
Voltage max. ( at 25°C)
TSP-BAT24-034 0.80A 3.4Ah
TSP-BAT24-072 24VDC 1.75A 7.2Ah
TSP-BAT24-120 3.00A 12Ah
Buffer Module
MODEL Nominal Charge Current Capacity
Voltage max. (typ.) (at 25°C)
TSP-BFM24 24-28VDC 200mS@25A 600W
[email protected]
Dimensions Function Modules
TYPE Width Height Depth
TSP-REM360 35 (1.38) 110 (4.33) 110 (4.33)
TSP-REM600 54 (2.13) 110 (4.33) 110 (4.33)
TSP-BCM24 35 (1.38) 110 (4.33) 110 (4.33)
TSP-BCM24A 35 (1.38) 110 (4.33) 110 (4.33)
TSP-BFM24 54 (2.13) 110 (4.33) 110 (4.33)
Dimensions Battery Packs
TYPE Width Height Depth
TSP-BAT24-034 137 (5.39) 140 (5.51) 76 (2.99)
TSP-BAT24-072 133 (5.24) 157 (6.18) 110 (4.33)
TSP-BAT24-120 199 (7.83) 157 (6.18) 110 (4.33)
Redundancy Module
With this module and two power supplies of
the TSP series, a highly reliable, true
redundant power system can be configured
without any additional components. This
module provides:
• Operation with true current sharing
• Alarm outputs & redundancy OK signal
• Hot swappable inputs can be loaded up
to 15A each (25A with model
TSP-REM600)
Battery Controller Module
This module provides a professional battery
controller to charge and monitor an external
lead-acid battery. Together with a power
supply from the TSP series and a battery
pack, a perfect DC-UPS system can be
configured. This module provides:
• Battery protection for overvoltage, deep
discharge, short circuit and reverse
connection
• Remote On/Off for battery & PSU
• Alarm outputs for input, output & battery
• Controlled end of charge voltage by
temperature sensor
Battery Packs
Sealed, maintenance free lead-acid
batteries including wall mounting kit.
Available with 3.4, 7.2 and 12Ah
capacity.
Buffer Module
This module will maintain the output voltage
of a 24VDC power supply during typical
mains faults, short time black-outs or voltage
dips of up to ten full 50Hz cycles. During this
buffer period, no deterioration of the 24VDC
output voltage will occur. This module
provides:
• Guaranteed hold up time 200mS@25A to
[email protected] max.
• Capacitor bank for energy storage
• Output 24 to 28VDC, 600W max.
• Active ready and inhibit signals
Features
• TSP-REM redundancy module with active current
sharing for highly reliable parallel operation
• TSP-BCM battery controller module to configure a
professional DC-backup systems (DC-UPS)
• TSP-BAT battery packs with capacity from 3.4 to 12Ah
• TSP-BFM buffer module to bridge voltage dips and
black-outs up to 4 seconds without batteries
www.powersolve.co.uk