Powersolve CFM200S Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
AC-DC Converter
CFM 200S Series
200 Watt U-Frame
Single Output
Input Voltage Range 90 - 264Vac
Frequency 47 - 63Hz
Inrush Current 60A max. @ 264Vac
Conducted EMI CISPR/FCC Class B
Isolation - Input/Output 4242VDC
Leakage Current 3.5mA max.
Total Rated Output Power 200W (with 30CFM air flow or optional fan)
Current Share (parallel operation) Single wire current sharing (connection pin 7 of CN6)
Remote Voltage Sense Compensates for wire voltage drop
Hold-up Time 16mS typ. @ 115Vac
Over Voltage Protection Recycle AC input to restart
Over Temperature Protection Auto-recovery
Short Circuit Protection Auto-recovery
Operating Temperature Range 0°C to +70°C (Derate at 2.5% / °C over 50°C)
Storage Temperature Range -20°C to +85°C
Safety Approvals cUL/UL 60950, TUV EN60950
Dimensions 150 x 100 x 38.1 mm (Standard U-Frame)
(5.91 x 3.94 x 1.5 inches)
150 x 101.6 x 58.5 mm (With optional top cover & fan fitted)
(5.91 x 4 x 2.3 inches)
Weight 700g (800g with top cover & fan fitted)
Electrical Specification
www.powersolve.co.uk
Features
• Universal input range 90-264Vac
• Active PFC meets EN61000-3-2
• Efficiency to 80%
• Meets CISPR/FCC Class B
• Current Sharing & Remote On/Off Control
• Overvoltage, Over Temperature & Short Circuit protection
Output Voltage and Current Ratings
MODEL OUTPUT OUTPUT CURRENT RIPPLE VOLTAGE LINE LOAD
VOLTAGE Min. Max. (mV pk-pk) ACCURACY REG. REG.
CFM200S-033 3.3V 0A 40.0A 1% ±1% ±1% ±1%
CFM200S-050 5.0V 0A 40.0A 1% ±1% ±1% ±1%
CFM200S-090 9.0V 0A 22.2A 1% ±1% ±1% ±1%
CFM200S-120 12V 0A 16.7A 1% ±1% ±1% ±1%
CFM200S-150 15V 0A 13.4A 1% ±1% ±1% ±1%
CFM200S-180 18V 0A 11.2A 1% ±1% ±1% ±1%
CFM200S-240 24V 0A 8.4A 1% ±1% ±1% ±1%
CFM200S-280 28V 0A 7.2A 1% ±1% ±1% ±1%
CFM200S-300 30V 0A 6.7A 1% ±1% ±1% ±1%
CFM200S-360 36V 0A 5.6A 1% ±1% ±1% ±1%
CFM200S-480 48V 0A 4.2A 1% ±1% ±1% ±1%
Suffix 001: without top fan & cover. Suffix 002: with top fan & cover.
NOTE:
1. Output noise and ripple measured with 47µF electrolytic & 0.1µF ceramic capacitors across output.
2. Voltage accuracy is set at 60% rated load & 25°C ambient temperature.
3. Line regulation is measured from High Line to Low Line at rated load.
4. Load regulation is measured from 20% -100% of full load.