Powersolve PSE130 Series - Manual

Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
Desk Top Power Supplies
PSE130 Series
83-130 Watts Switch Mode
Universal AC Input
Features
• Single & dual output versions
• Optional output connectors
• 100% burn in
• Wide input voltage range of 90-264VAC
• Input Surge Current Protection
• Overvoltage Protection
• Overcurrent Protection
• Input conforms with EN1000-3-2 Power Factor Correction
Input Voltage: 90-264 VAC
Input Frequency: 47-63 Hz
Input Current: 3.2A 115VAC, 1.7A 230VAC
Earth Leakage Current: 0.5mA typical, 0.75mA max
Output Voltage: See table
Output Current: See table
Output Power: See table
Ripple & Noise: 0.5% typical, 1% max pk-pk
Line Regulation: 0.5% typical, 1% max
Load Regulation: 3% typical, 5% max
Over Voltage Protection: 112-132% nominal current
Over Current Protection: 110-150% nominal current
Efficiency: 75-88% depending on model
Temperature Coefficient: All outputs ±0.04%/degree C maximum
Transient Response: 4mS 50-100% load change
Hold Up Time: 16mS @ 100VAC input & full load
Operating Temperature: 0° to +70° C, derate linearly from 100% at 40° C to 50% at 70° C
Storage Temperature: -40° to +85° C
Relative Humidity: 5 to 95%
Safety Approvals: UL, cUL, EN60950, CB & CE
EMC: Conform to EN55022’B’, FCC Part 15’B’ and CISPR 22 class ‘B’
Specification
The PSE130 series of AC/DC switching power supplies
offer up to 130 Watts of continuous output power from a
universal AC input.
All models meet CISPR class ‘B’ and FCC class ‘B’
emission limits and carry full UL, cUL &
TUV(EN60950) safety approvals.