Powersolve Slave Series Adapter - Manual

MASTER / SLAVE - SERIES ADAPTER
Features
• Programming and monitor offset : +/- 60 µV typical
• Full scale error : 0.1 % calibrated
• Non-linearity : 0.01% typical, 0.05 % max. TC = 65 ppm/°C
• Common mode rejection : 80 dB @ 50 Hz
• Temperature coefficient : -65 ppm typical
• Voltage range : 0 - 5 V
• Offset : ±60 µV typical, ± 180 mV max.
The full scale voltage of the M / S
SERIES ADAPTER is
factory-calibrated within 0.1 %.
Offset, full scale error, non-linearity
and temperature coefficient have to be
added to the specifications of the
power supply.
General
• A 15 pole 1:1 cable (0.6m) is supplied with the ADAPTER.
• The number of M / S SERIES ADAPTERS needed is one less than the number of
power supplies in the series system (see example).
• For remote programming and monitoring please refer to the power supplies’ manual.
Example with 3 power supplies
Specifications
Unit 8A
Arnhem Road
Newbury. RG14 5RU Tel: +44 (0) 1635 521858
Fax: +44 (0) 1635 523771
www.powersolve.co.uk
• Connecting SM-3000 and ES-Series in master/slave series mode
• The master power supply can be upper or the lower power supply in the series
• Easy way of connection power supplies in the master /slave series mode
• Equal voltage sharing in the series operation
• Series operation possible up to 600 V