Powersolve TSC 19i Series - Manual

www.powersolve.co.uk
Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
Line regulation: ±0.1% max.
Load regulation: ±0.2% max.
Ripple & Noise: 0.5% Vmrs
Cunducted EMI: EN 55022-A
Noise Immunity: EN 50082
Short circuit protection: continuous, automatic recovery
Overvoltage protection: 105% of Vout
Efficiency: 90% typ.
Operating temperature range: –10°C ... +50°C
I/O isolation voltage: 2100 VDC (Vin < 60 VDC)
3500 VDC (Vin > 60 VDC & VAC input models)
Safety standards: IEC/EN 60950
= 19¨-Subracks
= Robust mechanical Design for Industrial Applications
= Also with AC-Input 115/230 VAC or 400/480 VAC 3P available
= Standard Models with Output Voltages up to 800 VDC
= EMI complies with EN 55022, Class A
= Available with many Standard Options
DC/DC Converters
TSC 19” Series, 5kW–22kW
Power Width Depth Height
[Watts] [mm] [mm] [mm]
5/7.5/10 19¨ 600 178 (4U)
6/8/12 19¨ 360/460* 267/400 (6/9U)
22 19¨ 600 356 (8U)
* depending on output current
Dimensions
High Power
Input voltage range Output power Output voltage range
10 – 16 VDC
18 – 36 VDC
36 – 75 VDC
80 – 160 VDC
160 – 320 VDC
320 – 640 VDC
450 – 800 VDC
Options: - Input voltage: 115/230 VA\C, single phase or 200/400/480 VAC, three phase
- Input polarity protection
- Output decoupling diode for redundant / parallel operation
- Active current sharing for parallel operation
- Remote On/Off (inhibit)
- Output programmable via analogue signal
- Monitoring of input an output voltage
- RS232 or IEEE488 interface
- Wall mounting
- Increased mechanical strength
- Automatic/manual setting of output characteristic
- Temperature compensated battery charging voltage
- Digital Volt- and Ampere meter
- Tropical protection
Models
Models with
5kW – 22kW
available
4.5 – 5.5 VDC
8 – 10 VDC
11 – 13 VDC
14 – 16 VDC
23 – 26 VDC
26 – 30 VDC
45 – 55 VDC
58 – 68 VDC
100 – 130 VDC
200 – 250 VDC
380 – 400 VDC
570 – 600 VDC
760 – 800 VDC