Powersolve 2UPSWI Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
DC-AC INVERTERS
2UPSWI Series
Pure Sine Wave
2000 & 3000 Watts
Features:
• 12V, 24V, 48V, 110V or 220V DC Inputs
• High Surge Rating
• 50/60 Hz Pure Sine Wave Output
• 100-120 or 200-240VAC Output Voltage
• 2U 19” Rack Mounting
Electrical Specification
DC Inputs: 12V, 24V, 48V, 110V, 220V DC (see table below)
Output Voltage: 100 to 120VAC (tune VR) or 200-240VAC (tune VR)
Output Frequency: 50/60Hz switch selectable
Output Power: 2000W or 3000W continuous depending on model
Surge Rating: 2000W model, 2300W 3 mins, 2500W 3 secs & 4000W peak
3000W model, 3200W 3 mins, 3500W 3 secs & 6000W peak
Peak Output Current (120/240VAC): 25A/11A 2000W & 30A/15A 3000W
No Load Input Current: See table
Output Waveform: R Load pure sinewave <3% THD
Power Factor: 1.0
Protection: Overload, short circuit, reverse polarity (fuse),
over/under input voltage, over temperature
Digital Display: OVP, UVP, OTP, OLP, VAC, Amps, Watts, VDC, Temp, Hz
Interface Control Port: RS232 baud rate 2400, 4800, 9600, 19200 switch select
Remote Control Unit: Optional - consult sales office for details
AC Input (for UPS use): Either nominal 110VAC or 220VAC, depending on model
AC Input Frequency: 50~60Hz ±3%
Bypass Switchover Time: 4~6mS
Operating Temperature Range: -20ºC to +50ºC
Storage Temperature Range: -30ºC to +70ºC
Cooling: Thermostatically controlled integral fan
Dimensions (in mm): 424W X 435D X 88H
Output Socket: Optional, UK, Euro, USA , Australia & NZ or Universal
Weight: 2000W 12.8kgs, 3000W 14.3kgs
Safety: EN60950-1, UL458 on 1500W 120VAC output model
EMC: 2000W Models FCC ‘A’ (110V output), EN55022’A’, EN55024, EN61000-3-2,
EN61000-3-3, EN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11
3000W Model FCC’A’ (110V input), EN55022’A’, EN61000-3-2, EN61000-3-3