GE P&W Ultrapure and Drinking Water TOC Analyzers - Sievers 5310 C Series TOC Analyzers - Manual

Fact Sheet
Overview
The Sievers* 5310 C Series Total Organic Carbon (TOC)
Analyzers were designed specifically for the municipal
drinking water market. They offer superior accuracy and
precision across a dynamic operating range of 4 parts
per billion (ppb) to 50 parts per million (ppm) TOC.
The 5310 C TOC Analyzers were engineered for ease of
use and cost-effective operation. They offer automated
procedures such as calibration, verification, reagent
adjustment, and percent removal calculation for easier,
faster TOC monitoring. Available in three models—
5310 C Laboratory, 5310 C On-line, and 5310 C Portable
—these low maintenance Analyzers need no external
reagents or gas supplies, and offer one-year calibration
stability.
Key Applications
The 5310 C Analyzers monitor raw and finished water
TOC for plant optimization, USEPA compliance report-
ing, and distribution security monitoring applications.
They recover the most difficult-to-oxidize organic com-
pounds by combining UV/persulfate oxidation with the
proven Sievers Membrane Conductometric Detection
Technology, a USEPA-approved methodology under
Standard Methods 5310 C and USEPA Method 415.3.
The 5310 C specifically calculates Percent TOC Removal
in both grab and on-line mode
1 to support Disinfectant
and Disinfection Byproducts Rule (D/DBPR) compliance.
The 5310 C Analyzers offer great flexibility. They can be
used for continuous on-line measurement, or to ana-
lyze water samples with different sample matrices and
concentrations from various points in a plant’s treat-
ment process with the highest efficiency and accuracy.
The highly versatile Portable version can be moved
between the lab and the plant to facilitate on-line pilot
studies and full-scale testing for process optimization.
Features and Benefits
The 5310 C Analyzers features best-of-class ease of use
in setup, operation, and maintenance.
• Easy Operation — The 5310 C Analyzers’ large, color
touch-screen display makes it easy to set up instru-
ment parameters. No special training is required to
operate the Analyzers.
• Low Maintenance Requirements — The 5310 C
Analyzers prompt users automatically to perform
preventive maintenance—typically only a few hours
per year. The modular design simplifies consum-
ables replacement and preventive maintenance.
• 12-Month Calibration Stability — The 5310 C
Analyzers offer 12-month calibration stability, unlike
some analyzers that require weekly or even daily cal-
ibration. By following the on-screen prompts, users
can select from various calibration routines.
Grab Mode Alphanumeric Labeling Screen Shot
Sievers 5310 C Series
TOC Analyzers
* Trademark of General Electric Company; may be registered in one or more countries.
GE Analytical Instruments
GE Water & Power
Water & Process Technologies
Analytical Instruments