beautypg.com

Fig. 1.2, Fig. 1.1 – Peerless-AV PLP-UNM-S - Installation User Manual

Page 4

background image

4 of 5

ISSUED: 06-01-06 SHEET #: 202-9145-4 08-08-12

Begin with the shortest length screw, hand thread through washer and adapter bracket into screen as shown below.
Screw must make at least three full turns into the mounting hole and fit snug into place. Do not over tighten. If
screw cannot make three full turns into the screen, select a longer length screw from the baffled fastener pack.
Repeat for remaining mounting holes, level brackets and tighten screws.

NOTE: Spacers may not be used, depending upon the type of screen.

Begin with longer length screw, hand thread through washer, adapter bracket and spacer in that order into screen as
shown below. Screw must make at least three full turns into the mounting hole and fit snug into place. Do not over
tighten. If screw cannot make three full turns into the screen, select a longer length screw from the baffled fastener
pack. Repeat for remaining mounting holes, level brackets and tighten screws.

For Flat Back Screen

For Bump-out or Recessed Back Screen

SCREEN

WASHER

SCREW

ADAPTER

BRACKET (BB)

fig. 1.2

SPACER

fig. 1.1

1-1

1-2

ADAPTER

BRACKET (BB)

SCREEN

WASHER

SCREW

If you have any questions, please call Peerless customer care at 1-800-865-2112.

If you have any questions, please call Peerless customer care at 1-800-865-2112.