Peerless-AV WL-SA761PU-200 - Installation - Manual (Page 21)

21 of 23 ISSUED: 08-24-12 SHEET #: 180-9036-3 10-31-12
HDMI-
OUT
Cable Management
NOTE: Make sure extension cord (not included) has
enough slack to allow full movement of the arm.
Run extension cord (not included) through top
or bottom of arm (A). Lock cables into place by
snapping cable covers (J & K) onto mount as
shown. Display may have to be moved for easy
access.
Optional: If additional cable management is
required route cable ties (G) through slots of arm (A)
as shown in detail 8.
22
K
J
A
G
CABLE
DETAIL 8
SLOT
Snap wall plate covers (F) to top and bottom of
wall plate rails as shown.
Plug the component cable(s) from your display
(HDMI shown) into the wireless receiver. Plug extension cord (not included) into the tripe tap
grounded outlet.
23
20 21
F
WALL PLATE RAIL
EXTENSION CORD
COMPONENT
CABLE