Peerless-AV WL-SA761PU-200 - Installation - Manual (Page 14)

14 of 23 ISSUED: 08-24-12 SHEET #: 180-9036-3 10-31-12
Slide universal adapter bracket (B) to the opposite side and align second display bracket with second set of
display mounting holes.
Hand thread screws through the multi-washer, display brackets, enclosure mounting brackets (T) and spacer into
display as shown. Tighten all screws.
7-5
Center universal adapter bracket (B) horizontally on back of display as shown in fi gure 7.3.
Tighten two 1/4-20 x 1.25" screws. Reinstall four 1/4-20 x .6" screws using 5mm allen wrench (I) into fi xed-stop
position 1 as shown in fi gure 7.4.
7-6
fi g. 7.4
FIXED STOP POSITION #1 WITH
1/4-20 x .6" SCREWS
fi g. 7.3
1/4-20 x 1.25" SCREWS
SCREW MULTI-
WASHER
SPACER
T
B
B
DISPLAY
BRACKET