Peerless-AV WL-SA761PU-200 - Installation - Manual (Page 19)

19 of 23 ISSUED: 08-24-12 SHEET #: 180-9036-3 10-31-12
Hook M10 x 15mm screws into keyslots of wall arm adapter plate (A) as shown fi gure 17.1.
Insert two M10 x 15mm screws (E) into bottom holes of adapter plate as shown in fi gure 17.2. Tighten all
fasteners with 6mm allen wrench (H). 17-1
A
B
B
E
ADAPTER
PLATE
DISPLAY NOT
SHOWN FOR
CLARITY
DISPLAY NOT
SHOWN FOR
CLARITY
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the display.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15mm
screws (E) to 40 in. • lb. (4.52 N.M.) maximum torque.
WARNING
Mounting Flat Panel Display
17
1/4"
M10 X 15MM SCREW
fi g. 17.1
fi g. 17.2