Section4. using snmpview – PowerWalker SNMP DP-522 User Manual
Page 69
Section4. Using SNMPView
When use SNMP view at the first time, the system will ask for input the user's name
and password. Please enter the default value as follows to start the SNMPView.
User Name: Admin
Password:
After the SNMPView program start up the main windows will be displayed. The
left panel will list the available stations by area and the right panel will list the UPS,
Host Name, Startup Time, Manager and Location of UPS found in each station.
Shows that the device is a UPS
Shows that the UPS is Battery Low
Shows that the UPS is Disconnect / Off-Line
63