PowerWalker SNMP DP-522 - Manual (Page 64)

vi. Shutdown Windows
To configure if shutdown or Sleep the Windows system when power failure.
vii. When AC failed, commence computer shutdown sequence in xx Min.
To configure the time delay between the AC failure and the system shutdown.
viii. When Battery Low, commence computer shutdown sequence in xx
Min.
To configure the time delay between the Battery Low and system shutdown.
ix. Notify Scheduled shutdown before xx Min.
Time before the ‘Schedule Shutdown’ to make notification.
x. Auto save application files
Check if to save the application files before system shutdown.
xi. Run Application before shutdown computer
Execute the application before system shutdown.
xii. Turn Off UPS (For NetAgent Only)
Setting if to turn-off UPS power after system shutdown.
xiii. Turn Off UPS Shutdown sequence in XX Seconds
Setting to turn off UPS in XX seconds.
2.2 Closed Files
User could review all the files closed during previous shutdown process. If the “Auto
save application files” function has been turn-on in the “Setting” dialog, the details
of the closed application and files could be reviewed here.
Fig.46 ClientMate: Closed Files
58