Reset to factory default – PowerWalker SNMP DP-522 User Manual

Page 58

Text mode
Original mode

2.4.3 Help

This to help to illustrate the operation of NetAgent

2.4.4About

About

This to check Netagent’s Firmware/Hardware version and serial number

Save/Restore Settings
Click Save to save the configuration to your PC. The text file will have a default
format of YYYY_MMDD_####.cfg. Administrator permission required.

Restore previous configuration

Use this function to restore a *.cfg configuration that has been saved earlier.
Click Browse… to the location of the file and click Restore.

Reset to factory default
This function will reset all settings to its default value.